一般排风机系统和空调系统的安装，要在建筑物围护结构施工完_新闻动态_广州通风管道,螺旋风管,不锈钢风管,镀锌风管安装-诚信加工厂家

新闻动态

当前位置：网站首页 > 新闻动态 > 详细信息

一般排风机系统和空调系统的安装，要在建筑物围护结构施工完

添加时间：2023/7/15 15:07:28 浏览次数：

关于通风管道施工需要做的准备。
Preparation required for ventilation duct construction.
一、作业条件
1、 Operating conditions
1、一般排风机系统和空调系统的安装，要在建筑物围护结构施工完，障碍物已清理，地面无杂物的条件下进行。
1. The installation of general exhaust fan systems and air conditioning systems should be carried out after the construction of the building enclosure structure is completed, obstacles have been cleared, and the ground is free of debris.
2、作业地点要有相应的辅助设施，如梯子、架子、安全防护、消防器材，并有施工员的技术、质量、安全交底。
2. The work site should have corresponding auxiliary facilities, such as ladders, shelves, safety protection, fire equipment, and technical, quality, and safety briefings from construction workers.
3、对空气洁净系统的安装，应在建筑物内部安装部件的地面做好，墙面已抹灰完毕，室内无灰尘飞扬或有防尘措施的条件下进行。
3. The installation of the air cleaning system should be carried out on the ground where the components are installed inside the building, with the walls plastered and no dust flying or dust prevention measures taken indoors.
4、一般除尘系统风管安装宜在厂房的工艺设备安装完或设备基础己确定，设备连接器、罩体方位已知的情况下进行。
4. The installation of air ducts for general dust removal systems should be carried out after the installation of process equipment in the factory or when the equipment foundation has been determined, and the orientation of equipment connectors and covers is known.
5、检查现场预留孔洞位置;尺寸应符合图纸要求，每边比实际截面大100mm。
5. Check the location of reserved holes on site; The size should meet the requirements of the drawing, with each side 100mm larger than the actual section.
二、材料要求
2、 Material requirements
1、安装使用的材料:螺栓、螺母、垫圈、垫料、密封条泥杆保定古筝塑料增韧剂拱形护坡模具保定空调维修托辊生产线、自攻螺钉、拉铆钉、电焊条、各种帆布、无纺布、射钉、膨胀螺栓等应符合产品质量要求。
1. The materials used for installation: bolts, nuts, washers, gaskets, sealing strips, self tapping screws, rivets, welding electrodes, various canvas, non-woven fabrics, injection nails, expansion bolts, etc. should meet the product quality requirements.
2、各类板材、管材等应有质量证明文件(包括出厂合格证、质量合格证明及检测报告等)和产品清单。
2. All types of plates, pipes, etc. should have quality certification documents (including factory certificates, quality certificates, and inspection reports) and product lists.

上一页通风管道在厨卫吊顶安装中有何注意事项：

下一页螺旋风管和普通的通风管道有什么区别？